Surface roughness tester sensor

标准传感器 e1770628034801
12 1
小孔传感器 e1770628052573
深槽传感器 e1770628084311
曲面传感器 e1770628073705
传感器转接杆 e1770628096596
传感器延长杆 e1770628062362
Thumbnail 1
Thumbnail 2
Thumbnail 3
Thumbnail 4
Thumbnail 5
Thumbnail 6
Thumbnail 7

Technical Specifications

Standard Sensor Small Hole Sensor Extension Rod Extended Probe
 
Curved Surface Sensor Deep Groove Sensor Adapter Rod
Standard Sensor SRT-SS Suitable for measuring the surface roughness of planes and shafts. When measuring the inner surface roughness of holes, it can be used for holes with a diameter greater than 6mm, with a maximum depth of 22mm.(Included in the standard equipment package.)
Small Hole Sensor SRT-SH Capable of measuring the surface roughness of holes with a diameter greater than 2mm, with a maximum depth of 9mm. It can also be used for measuring planes and cylindrical surfaces.
Curved Surface Sensor SRT-CS Designed for measuring the surface roughness of concave and convex curved workpieces with a radius of curvature greater than 3mm. It can also be used for suitable planes and cylindrical surfaces in conjunction with a measuring platform.
Deep Groove Sensor SRT-DGS Applicable for measuring the surface roughness of grooves with a width greater than 3mm and a depth less than 10mm, or steps with a height less than 10mm. It can also be used for measuring planes and cylindrical surfaces when used with a measuring platform.
SRT-DGS SRT-EP For measuring the surface roughness within grooves that have a width greater than 1mm and a depth less than 13mm.
Extension Rod SRT-ER Can extend the length of various sensors by 50mm. It is beneficial for measuring deep holes and can be equipped with two extension rods if necessary.
Adapter Rod SRT-AR Enables lateral movement of the measuring mechanism for surface roughness measurement.

문의하기

제품 정보, 견적 또는 기술 지원에 대해 문의하기

전화 문의 +86-0553-2836939
이메일 보내기 mikrosize@mikrosize.com