Fixture for Universal Testing Machine

图片3

图片67

图片66

图片65

图片64

图片63

图片62

图片61

图片54

图片60

图片59

图片58

图片57

图片56

图片55

图片53

图片52

图片51

图片50

图片49

图片48

图片47

图片46

图片45

图片44

图片43

图片42

图片41

图片40

图片39

图片38

图片37

图片36

图片35

图片34

图片33

图片11 1

图片32

图片30

图片29

图片28

图片27

图片26

图片25

图片24 1

图片24

图片23

图片22

图片21

图片20

图片19

图片18

图片17

图片16

图片15

图片14

图片13

图片12

图片11

图片10

图片9

图片8

图片7

图片6

图片5

图片4

Technical Specifications

Model

Fixture Name

Photo/Figure

Application

MS-2T

2T Standard Fixture Joint

●Standard fixture joint for 2T and below range

MS-5T

5T Standard Fixture Joint

●Standard fixture joint for 5T range

MS-1A

1T Hand operated wedge-shaped tensile fixture

●Hand-operated self-clamping type. ●Used for tensile tests of plastics, metals, etc., with a range ≤ 10KN. ●The width of the clamping piece is 25mm, and it can hold specimens with a thickness of 0 - 7mm. ●It has only flat jaws.

MS-1B

2T Hand operated wedge-shaped tensile fixture（Circular shape）

●Hand-operated self-clamping type. ●Used for tensile tests of plastics, metals, etc., with a range ≤ 20KN. ●The width of the flat clamping piece is 30mm, and it can hold specimens with a thickness of 0 - 7mm. It has only flat jaws.

MS-1C

2T Hand operated wedge-shaped tensile fixture（Angular shape）

MS-1D

5T Hand operated wedge-shaped tensile fixture（Circular shape）

●Hand-operated self-clamping type.

●Used for tensile tests of plastics, metals, etc., with a range ≤ 50KN.

●Optional jaws:

●Flat jaws: 0 - 7mm, 7 - 14mm, 14 - 21mm;

●V-shaped jaws: Φ4 - 9mm, Φ9 - 14mm, Φ14 - 21mm.

●The width of the clamping piece is 35mm.

●Flat jaws are used to hold flat specimens, and V-shaped jaws are used to hold round bar specimens.

MS-1E

5T rotary type wedge-shaped tensile fixture（Circular shape）

●Clamped by rotating the handle. ●Used for tensile tests of hard plastics, metals, etc., with a range ≤ 50KN. Optional jaws: ●Flat jaws: 0 - 7mm, 7 - 14mm, 14 - 20mm; ●V-shaped jaws: Φ4 - 9mm, Φ9 - 14mm, Φ14 - 21mm. ●The width of the clamping piece is 35mm. ●Flat jaws are used to hold flat specimens, and ●V-shaped jaws are used to hold round bar specimens.

MS-1F

10T rotary type Hand operated wedge-shaped tensile fixture（Circular shape）

●Clamped by rotating the handle. ●Used for tensile tests of metals, etc., with a range ≤ 100KN. ●Optional jaws: Flat jaws: 0 - 7mm, 7 - 14mm, 14 - 20mm. ●The width of the clamping piece is 40mm.

MS-1G

Plastic profile modeling tensile fixture

●Used for tensile tests of thick plastic specimens such as pipes. ●The range is ≤ 20KN, and it is suitable for ISO standard dumbbell-shaped specimens.

MS-2A

Single eccentric wheel fixture

●Self-clamping type. ●Used for tensile tests of soft rubber plastics such as rubber and silicone. ●The width of the clamping piece is 50mm, and it can hold a 4mm-thick specimen.

MS-2C

Dual eccentric wheel fixture

●Self-clamping type. ●Used for tensile tests of soft rubber plastics such as rubber, silicone, and wire sheaths. ●The width of the clamping piece is 35mm, and the clamping thickness is 4mm.

MS-2D

Hand held tensile

fixture

●Self-clamping type. ●Used for tensile tests of soft rubber plastics such as rubber and silicone. ●The clamping piece is 20*40mm, and it can hold a 5mm-thick specimen.

MS-2E

Lever

tensile

fixture

●Self-clamping type. ●Used for tensile tests of soft rubber plastics such as rubber and silicone. ●The clamping piece is 25*45mm, and it can hold a 5mm-thick specimen.

MS-2F

Reverse eccentric wheel fixture

●Self-clamping type. ●Used for tensile tests of wire sheaths and other soft rubber plastics. ●The width of the clamping piece is 30mm, and the clamping thickness is 5mm.

MS-2G

Powerful clamp fixture

●Clamping force adjustable type. ●Used for tensile and peeling tests of rubber, silicone, leather, shoe materials, etc. ●The clamping piece specifications are 40mm in width, 15mm in height, and have R1 arc teeth.

MS-3A

MS-3B

Three point bending fixture

●Used for three-point bending property tests of plastics. ●The short-span is 150mm (MS-3A), and the long-span is 250mm (MS-3B). ●The width of the pressure point and the fulcrum is 50mm. ●The conventional pressure point arc is R5mm, and the conventional fulcrum arc is R5mm. ●Optional fulcrum arc R2mm is available.

MS-3C

Three point bending fixture with dial indicator

●Used for three-point bending property tests of plastics or other materials. The span is 250mm. ●The width of the pressure point and the fulcrum is 50mm. ●The pressure point arc is R5mm, the fulcrum arc is R5mm, and the fulcrum arc is R2mm. ●It is equipped with 2 sets of fulcrums.

MS-3D

Glass four point bending fixture

●Used for four-point bending tests of glass materials. ●The width of the test specimen can be 200MM. The radius of the pressure point and the support point is R3. ●The upper fixture span is ≤ 100mm, and the lower fixture span is ≤ 150mm.

MS-3E

Ceramic three-point and four point bending fixture

●Used for three-point and four-point bending tests of fine ceramics. ●The span is adjustable. The radius of the pressure point and the fulcrum is R2.5mm, and the width is 30mm. ●It is equipped with a guiding device.

MS-4A

2T compression fixture

●Used for compressive strength tests of non-metallic materials or products with low hardness. ●The range is ≤ 20KN, and the diameter of the pressure plate is 120mm.

MS-4B

5T compression fixture

●Used for compressive strength tests of metals, ceramics, or materials with high hardness. ●The range is ≤ 50KN, the diameter of the pressure plate is 80mm, and the pressure plate is hardened.

MS-4C

10T compression fixture

●Used for compressive strength tests of metals, ceramics, or materials with high hardness. ●The range is ≤ 100KN, the diameter of the pressure plate is 60mm, and the pressure plate is hardened.

MS-4D

Ring stiffness fixture

●Used for ring stiffness tests and flattening tests of thermoplastic plastic pipes. ●The fixture area is 300*300mm.

MS-5A

100N pneumatic fixture

●Used for tensile/tearing tests of films, papers, etc. ●The range is ≤ 100N. The clamping piece specifications are 30mm in width * 40mm in height (adhesive surface), and the clamping thickness is 5mm.

MS-5B

100N pneumatic fixture（widen type）

●Used for tensile/tearing tests of films, papers, etc. The range is ≤ 100N. ●The clamping piece specifications are 55mm in width * 30mm in height (adhesive surface), and the clamping thickness is 5mm.

MS-5C

500N pneumatic fixture

●Used for tensile/tearing tests of films, papers, etc. The range is ≤ 500N. ●The clamping piece specifications are 55mm in width * 30mm in height (adhesive surface), and the clamping thickness is 8mm.

MS-5D

1KN pneumatic fixture

●Used for tensile/tearing tests of cloth, non-woven fabrics, and plastic films. The range is ≤ 1KN. ●The clamping piece specifications are 2525, 2550, 25*80mm, and it can hold specimens with a thickness of 8mm. ●The clamping pieces are available with adhesive surfaces and metal patterns.

MS-5E

2KN pneumatic fixture

●Used for tensile/tearing tests of cloth, non-woven fabrics, and plastic films. The range is ≤ 2KN. ●The clamping piece specifications are 2525, 2550, 25*80mm, and it can hold specimens with a thickness of 8mm. ●The clamping pieces are available with adhesive surfaces and metal patterns.

MS-5F

2KN Pneumatic yarn clamp

●Used for tensile tests of single-strand and multi-strand yarns. The range is ≤ 2KN.

MS-5G

5KN Pneumatic clamp

●Used for tensile/tearing tests of cloth, non-woven fabrics, leather, and plastic sheets. ●The range is ≤ 5KN. The clamping piece specifications are 2525, 2550, 25*80mm, and it can hold specimens with a thickness of 6mm. ●The clamping pieces are available with adhesive surfaces and metal patterns.

MS-5H

5KN Pneumatic packaging tape fixture

●Used for tensile tests of plastic-steel tapes and packing tapes. The range is ≤ 5KN.

MS-5J

50KN Pneumatic wedge fixture

●Pneumatically clamped. ●Used for tensile tests of hard plastics, metals, etc., with a range ≤ 50KN. Optional jaws: Flat jaws: 0 - 7mm, 7 - 14mm, 14 - 20mm; V-shaped jaws: Φ4 - 9mm, Φ9 - 14mm, Φ14 - 21mm. ●The width of the clamping piece is 35mm. ●Flat jaws are used to hold flat specimens, and V-shaped jaws are used to hold round bar specimens.

MS-6A

Aluminum material small fixture

●Used for tensile tests of non-metallic materials such as plastic sheets, mask ear straps, and thin electronic wires. ●The range is ≤ 500N. ●The clamping piece specifications are 30mm in width, 30mm in height, the clamping thickness is 6mm, and it has R1 arc teeth.

MS-6B

Aluminum material adhesive small fixture

●Used for tensile tests of materials such as plastic films and papers. ●The range is ≤ 200N. ●The clamping piece specifications are 30mm in width, 30mm in height, the clamping thickness is 6mm, and the clamping piece is adhesive.

MS-6C

Steel material small fixture

●Used for tensile tests of materials such as plastic sheets and thin electronic wires. ●The range is ≤ 1KN. ●The clamping piece specifications are 30mm in width, 30mm in height, the clamping thickness is 6mm, and it has R1 arc teeth.

MS-6D

New adhesive aluminum fixture

●Used for tensile tests of plastic films, papers, copper foils, aluminum foils, etc. ●The range is ≤ 500N. ●The clamping piece specifications are 30mm in width, 30mm in height, the clamping thickness is 5mm, and it has adhesive flat jaws.

MS-6E

New adhesive aluminum fixture（widen type）

●Used for tensile tests of plastic films, papers, copper foils, aluminum foils, etc.

●The range is ≤ 500N.

●The clamping piece specifications are 65mm in width, 25mm in height, the clamping thickness is 5mm, and it has adhesive flat jaws.

MS-6F

C-type adhesive steel fixture

●Used for tensile tests of plastic films, papers, copper foils, aluminum foils, etc. ●The range is ≤ 1KN. ●The clamping piece specifications are 32mm in width, 25mm in height, the clamping thickness is 5mm, and it has adhesive flat jaws.

MS-7A

Bilateral adjustable aluminum fixture

(Adhesive tape peeled off at 180 °)

●Used for tensile tests of papers, films, soft plastics, etc., and 180° peeling tests of adhesive tapes. ●The range is ≤ 1KN. ●The clamping piece specifications are 30×40mm, the clamping thickness is 13mm, and it has R1 arc teeth.

MS-7B

Bilateral adjustable steel fixture

●Used for tensile shear tests of adhesives and tensile tests of other materials. ●The range is ≤ 5KN. ●The clamping piece is 55mm wide and 30mm high. ●It can hold specimens with a thickness of 30mm. ●The tooth shape is diamond pattern.

MS-7C

Bilateral adjustable steel fixture（lengthening type）

●Used for tensile shear tests of adhesives, tensile tests of composite boards, and tensile tests of other materials. ●The range is ≤ 5KN. ●The clamping piece is 55mm wide and 30mm high. ●It can hold specimens with a thickness of 50mm. ●The tooth shape is reverse serrated with reticulated pattern.

MS-7D

Stretching and shearing fixture

●Used for tensile shear tests of adhesives, tensile tests of composite boards, and tensile tests of other materials. ●The range is ≤ 10KN. ●The clamping piece is 52mm wide and 45mm high. ●It can hold specimens with a thickness of 30mm. ●The tooth shape is reverse serrated with reticulated pattern.

MS-8A

Fabric and leather tensile fixture

●Used for tensile tests of fabrics, melt - blown fabrics, leathers, etc. ●The clamping piece specifications are 55mm in width and 25mm in height. ●It can hold specimens with a thickness of 18mm. ●The tooth shape is R2 arc.

MS-8B

Non metallic large ripple fixture

●Used for tensile tests of soft plastics, PVC, wire sheaths, woven bags, fabrics, etc. ●It can hold specimens with a thickness of 10mm and has R3 arc teeth. ●The clamping piece is 55mm wide and 30mm high.

MS-8C

Non metallic large ripple fixture（widen type）

●Used for tensile tests of soft plastics, PVC, woven bags, fabrics, etc. ●It can hold specimens with a thickness of 10mm and has R3 arc teeth. ●The clamping piece is 105mm wide and 30mm high.

HT-9A

MS-9A

薄膜穿刺夹具（大孔）Thin film puncture fixture (large hole)

●Used for puncture resistance tests of films, papers, etc. ●The needle diameter is 1.0mm. ●The inner hole of the lower fixture is 50mm.

MS-9B

Thin film puncture fixture (small hole)

●Used for puncture resistance tests of films, papers, etc. ●The needle diameter is 1.0mm. ●The inner hole of the lower fixture is 10mm. ●Suitable for samples with a small area.

MS-9C

Cloth steel ball breaking fixture

●Used for steel ball bursting strength tests of textiles. ●The diameter of the steel ball of the upper fixture can be selected as 25mm or 38mm. ●The inner hole of the lower fixture is 45mm.

MS-9D

Geotextile top piercing fixture

●Used for top bursting and piercing tests of geotextiles. ●The diameter of the upper fixture for top bursting is 50mm, and the inner hole diameter of the lower fixture for top bursting is 150mm. ●The diameter of the upper fixture for piercing is 8mm, and the inner hole diameter of the lower fixture for piercing is 45mm. ●The height of the support rod of the lower fixture is 150mm.

MS-10A

20KN flat belt tensile fixture

●Used for tensile tests of soft braided belts, packing belts, etc. ●The range is ≤ 20KN. ●It can hold belts with a width of 50mm and a thickness of 8mm.

MS-10B

50KN flat belt tensile fixture

●Used for tensile tests of soft braided belts, packing belts, etc. ●The range is ≤ 50KN. ●It can hold belts with a width of 100mm and a thickness of 8mm.

MS-10C

Package tape tensile fixture

●Used for tensile tests of plastic - steel tapes and plastic packing tapes. ●The range is ≤ 5KN. ●It can hold tapes with a width of 22mm and a thickness of 2mm.

MS-11A

Coiling tensile fixture

●Used for tensile tests of non - metallic thin wires such as fishing lines and badminton racket strings. ●It can hold wires with a diameter of 3mm, and the diameter of the winding wheel is 30mm.

MS-11B

Non metallic wire tensile fixture

●Used for tensile tests of non-metallic thin wires. ●The range is ≤ 1KN. ●It can hold wires with a diameter of 3mm, and the diameter of the winding wheel is 30mm.

MS-11C

Metal thin wire tensile

fixture

●Used for tensile tests of thin metal wires. ●The range is ≤ 5KN. ●It can hold wires with a diameter of 4mm.

MS-11D

braided rope tensile fixture

●Used for tensile tests of braided ropes. ●The range is ≤ 20KN. ●The diameter of the winding wheel is 80mm, and the tooth shape of the clamping piece is R3 arc teeth.

MS-12A

90 degree peeling fixture

●Used for 90-degree peeling tests of adhesive tapes and adhesive papers. ●The steel plate is 50mm wide and 150mm long, and the quantity can be selected. ●The surface of the steel plate is mirror-finished.

MS-12B

Circular initial adhesion fixture

●Used to test the ring initial adhesion of adhesive papers, adhesive tapes, and self-adhesive products. ●The width is 24mm. ●It is equipped with one mirror-finished steel plate. ●It needs to be used in conjunction with the upper fixture.

MS-12C

Floating roller stripping fixture

●Used for testing the peeling strength of high-strength adhesives. ●The diameter of the upper fixture roller is 25mm, and the width of the clamped specimen is 30mm. ●Refer to GB/T 7122.

MS-12D

Roller peeling fixture

●Used for peeling tests of the adhesion force of composite boards. ●The diameter of the drum is 100mm, the width is 100mm, and the diameter of the convex circle is 125mm.

MS-13A

Terminal tensile

turntable fixture

●Used for testing the pulling force of terminals that are easier to hold and larger than the wires. ●Suitable for wire diameters of 3 - 12mm. ●The outer diameter of the turntable is 95mm and it can rotate. ●It needs to be used in conjunction with the lower fixture.

MS-13B

Large cable terminal tensile fixture

●Used for testing the pulling force of terminals. ●The maximum wire diameter is 32mm, and the fixture is adjustable.

MS-13C

Micro sharp beak tensile fixture

●Used for testing the pulling force of thin wires, terminals, and solder joints. ●The width of the jaw is 20MM, and the thickness of the fixture is 3mm.

MS-13D

Insertion and extraction force fixture

●Used for testing the insertion and extraction forces of terminals, connectors, USB plugs, etc. ●The clamping piece is 50mm wide and 30mm high, and it can hold specimens with a thickness of 45mm. ●The lower fixture is equipped with a cross table.

MS-13E

Connector tension fixture

●Used for testing the pulling force between wires and connectors. ●The width of the clamping piece of the lower fixture is 50mm, the inner height is 80mm, and the maximum opening is 80mm.

MS-13F

Adjustable small terminal tensile fixture

●Used for testing the pulling force of small terminals. ●The opening is adjustable, and the maximum opening is 8mm. ●It needs to be used in conjunction with the lower fixture.

MS-14A

Leather double-sided tearing fixture

●Used for double-sided tearing tests of leather specimens. ●The width of the hanging buckle is 10mm.

MS-15A

Bending hook tensile fixture

●Used for testing the pulling force of products such as tension springs. ●The hook diameter can be selected as 6mm or 8mm.

문의하기

제품 정보, 견적 또는 기술 지원에 대해 문의하기

전화 문의 +86-0553-2836939

이메일 보내기 mikrosize@mikrosize.com

Fixture for Universal Testing Machine

图片3

图片67

图片66

图片65

图片64

图片63

图片62

图片61

图片54

图片60

图片59

图片58

图片57

图片56

图片55

图片53

图片52

图片51

图片50

图片49

图片48

图片47

图片46

图片45

图片44

图片43

图片42

图片41

图片40

图片39

图片38

图片37

图片36

图片35

图片34

图片33

图片11 1

图片32

图片30

图片29

图片28

图片27

图片26

图片25

图片24 1

图片24

图片23

图片22

图片21

图片20

图片19

图片18

图片17

图片16

图片15

图片14

图片13

图片12

图片11

图片10

图片9

图片8

图片7

图片6

图片5

图片4

Technical Specifications

최신 제품

문의하기