Standard Test Block for Ultrasonic Tester

1 1

2 1

3 1

5 1

6 1

14 1

7

8

9

1 1

2 1

3 1

5 1

6 1

14 1

Standard Test Block for Ultrasonic Tester


CSII	CSK-IIA

Type	Execution Standard	Introduction
CSII Ultrasonic Test Block	NB/T47013-2015	This Test Block Is Suitable For The Detection Of Carbon Steel And Low-alloy Steel Forgings With A Thickness Less Than 45mm Using Dual Crystal Straight Probes, As Well As For The Radial Detection Of Carbon Steel And Low-alloy Steel Bolt Blanks With A Diameter Of M36 Or Larger Using Dual Crystal Straight Probes.
CSK-IIA Ultrasonic Test Block	NB/T47013-2015	This Test Block Is Suitable For The Ultrasonic Detection Of Type I Welded Joints With A Workpiece Thickness Range Of 6mm To 200mm Using Angle Probes And Straight Probes.


Comparison Block	CSII	DZ-1	CSK-IVA


CSK-IIIA	PAUT	GS Series Standard Test Block

Type	Execution Standard	Introduction
Comparison Block for Ultrasonic Testing	NB/T47013-2015	This Test Block Is Suitable For The Ultrasonic Detection Of Butt Joints In Pressure-bearing Equipment Made Of Aluminum And Aluminum Alloy, As Well As Titanium, With Thickness Greater Than Or Equal To 8mm~80mm
CSII Ultrasonic Test Block	JB/T4730-2005	This Test Block Is Suitable For The Ultrasonic Detection Of Raw Materials, Components, And Welded Joints Used In Pressure-bearing Equipment Made Of Metallic Materials. It Is Also Applicable For The Ultrasonic Detection Of Metallic Pressure-bearing Equipment In Service, And Can Be Refer- enced For The Ultrasonic Detection Of Supporting Parts And Structural Parts Related To Pressure-bearing Equipment.
DZ-1 Ultrasonic Testing Block for Straight Probe Blind Zone	NB/T47013-2015	This Test Block Is Suitable For Workpieces With A Thickness Of ≤40mm.
CSK-IVA Ultrasonic Compari- son Test Block	NB/T47013-2015 JB/T4730-2005	This Test Block Is Suitable For The Ultrasonic Detection Of Type I Welded Joints With A Workpiece Thickness Range Of 200 To 500mm Using Angle Probes And Straight Probes.
CSK-IIIA Ultrasonic Standard Flaw Detection Test Block	NB/T47013-2015	This Test Block Is Suitable For The Preparation Of Distance-amplitude Curves When Detecting Welded Joints With A Thickness Range Of 8mm To 120mm Using Angle Probes.
Phased Array Ultrasonic Testing (PAUT) Block	ISO 19675	This Test Block Is Suitable For The Ultrasonic Detection Of Type Ii Welded Joints With A Workpiece Thickness Range Of 4mm To 50mm Using Angle Probes.
GS Ultrasonic Test Block	NB/T47013-2015	This Test Block Is Suitable For Testing The Blind Zone Of Straight Probes.

Latest Products

Our newest precision measurement solutions

Last updated: 2026-02-14

View All New Products

Contact Us

Get in touch for product information, quotes, or technical support

Call us +86-0553-2836939

Email us mikrosize@mikrosize.com